MSG-2172 > 시그널/펑션제네레이터

전기/전자계측기 환경측정기 통신계측기 재료/측정/형식승인 전자파관련계측기 기타 중고계측기

Home 전기/전자계측기 시그널/펑션제네레이터

1번째 이미지 새창

MSG-2172 요약정보 및 구매

상품 선택옵션 0 개, 추가옵션 0 개

제조사	MEGURO
브랜드	MEGURO
모델	MSG-2172
판매가격	12,070,300원
배송비결제	주문시 결제

선택된 옵션

MSG-2172 (+0원)
수량

위시리스트 추천하기

이전상품 MSG-2174 다음 상품 MSG-2051A

상품 정보

상품정보
상품문의 0
배송 및 반품정보
관련상품 0

상품 상세설명

MDC-2172 VICS Decoder

This unit is the VICS Decoder designed for using together with DARC Encoder (MSG-2173).
In addition, MSG-2172 has a wide receiving band suitable for worldwide vics information. Received data are saved into the built-in memories up to max. 420 frames. Data of the built-in memory can be transfered to a personal computer with the attached application software.
Since this unit is provided with an analyzing function, it can be displayed the data error rate, SI ratio, and other data.
This unit can be operated at 100V to 240V AC, and also can be operated 12V to 15V DC (Car battery).
So that it can be used at a place where no AC power source is available.

■	Data receive This unit is provided with a wide-band electronic tuner and it can receive data simply by connecting an FM antenna. Received data can be saved into four built-in memories. Built-in memory 1 can save data of 240 frames (20 minutes), memories 2~4 can save data of 60 frames each (420 frames in total). Since the error rate of received data can be saved at the same time, this function is useful for collecting data in a field.
■	Data dump function This unit can display data being saved in built-in memories under the layer 3 conditions. A status is displayed every packet when dumping data.
■	Analyze function This unit provides two analyze functions consisting of data error rate measurement and SI monitoring. In error rate measurement, a packet error ratio of receiving data can be displayed.In SI monitoring, the receiving data ratio can be displayed by SI.
■	Others This unit can transfer data being saved in four memories to a personal computer or MSG-2173 (DARC encoder). The DARC editor can edit data that have been transferred to the personal computer. Since saved data can be output to CLOCK, DATA terminals on the panel, data can be transferred to MSG-2173 without using any personal computer.This unit can also be operated at 12~15V DC, so that it can be used at a place where no AC power source is available.

Electronic tuner
Input Level range	40dBµV to 100dBµV
Input impedance	75Ω
Receiving frequency range	76.1MHz to 108.0MHz (100kHz step)

Decoder
Save capacity	Layer 2 420 frames / Layer 3 420 frames
Error rate measuring quantity	Max. 99 frames

Data output unit
Clock output	Open collector (1kΩ pull up)
Data output	Open collector (1kΩ pull up)
RS-232C	25pin D-sub
• Baud rate	2400/4800/9600/19200
• Data bit	7,8bits
• Stop bit	1,2bits
• Parity	Even,Odd,None

General Data
Operating temperature range	0ºC to +40ºC
Guarantee temperature range	+5ºC to +35ºC
Power requirement	AC. 100V to 240V or DC. 12V to 15V
Power consumption	25VA max.
Dimensions	Approx. 440(W) × 115(H) × 375(D)mm
Weight	Approx. 5.0kg