PM 6306 RCL미터
모델 : PM 6306
* 고정밀 0.01% 와 교류검출 50Hz ~ 1MHz이고, 측정 레인지 전환은 자동레인지 측정 전환기능과 매뉴얼기능이 있으며, Contact check로 접촉정도 pass/Fail을 확인하여 정확한 test 할수 있는 기능과 구성요소를 9개의 parameter test 측정가능한 만능 오토메틱 RCL Meters 장비 입니다. 그리고, 부품테스트나 소자테스트에 제품의 양품및 불량테스트 확인 측정으로 가장 많이 쓰이는 장비입니다.
간단하고 , 사용하기가 편리합니다.
* 부품 Test ( SMD ,MLCC, .저항, 콘덴서 , 코일 ) 등을 측정.
* 제품의 양품및 불량 Test 확인 측정
| AC Test Mode |
| Test frequency | | PM 6306: | 50, 60, 100, 120 Hz |
| 200 Hz to 100 kHz (100 Hz steps) |
| 100 kHz to 1 MHz (1 kHz steps) | | PM 6304: | 50, 60, 100, 120 Hz |
| 200 Hz to 20 kHz (100 Hz steps) |
| 100 kHz |
|
| Test frequency accuracy | | PM 6306: | 0.01% | | PM 6304: | 0.01% |
|
| Test signal levels | | PM 6306: | 50 mV to 2V (10 mV steps) via 100Ω | | PM 6304: | 50 mV via 100Ω |
| 1V via 100Ω |
| 2V via 400Ω |
|
| Basic measurement accuracy at normal measurement mode | | PM 6306: | 0.1% ± 1 digit (for ³ 0.25V, £ 50 kHz) |
| 0.1% * (f/50 kHz) ± 1 digit (for ³ 0.25V, > 50 kHz) |
| 0.1% * (0.25V/Vt) ± 1 digit (for < 0.25V, £ 50 kHz) | | PM 6304: | 0.05% ± 1 digit (for PM 6304C, £ 2 kHz) |
| 0.1% ± 1 digit (for £ 20 kHz) |
| 0.4% ± 1 digit (100 kHz) |
| 0.5% ± 1 digit (for 50 mV £ 20 kHz) |
| 2.0% ± 1 digit (for 50 mV, 100 kHz) |
|
| DC bias |
| Internal | | PM 6306: | 0 to 10V (0.1V steps) | | PM 6304: | 2V |
|
| External | | PM 6306: | 0 to 40V | | PM 6304: | 0 to 40V |
|
| DC test mode (Optional) |
| Test signal levels | | PM 6306: | 50 mV to 2V (10 mV steps) via 100Ω | | PM 6304: | 300 mV via 100Ω |
| 1V via 100Ω |
| 2V via 400Ω |
|
| Basic measurement accuracy | | PM 6306: | 0.1% ± 1 digit (for ³ 0.25V) | | PM 6304: | 0.1% ± 1 digit (for 1V) |
|
| Contact check (PM 6306 only) |
| Pass | |
| Fail |
| 3Ω (with indication of failed connection lead) |
|
| Maximum measuring ranges |
| Impedance/Resistance AC Z or RAC | |
| Resistance DC R DC | |
| Capacitance C | |
| Inductance L | |
| Quality factor Q | |
| Dissipation factor D | |
| Phase Angle F | |
| Voltage monitor VX | |
| Current monitor IX | |
| Maximum resolution |
| Impedance/Resistance AC Z or RAC | |
| Resistance DC R DC | |
| Capacitance C | |
| Inductance L | |
| Quality factor Q | |
| Dissipation factor D | |
| Phase Angle F | |
| Voltage monitor VX | |
| Current monitor IX | |
| Circuit diagram |
| Display |
| 1 of 7 different equivalent circuit diagrams |
|
| Auto Mode |
| Read-out |
| Dominant and secondary parameter |
|
| Equivalent circuit diagram |
| Parallel for R+C, Serial for R+L |
|
| Manual mode |
| Read-out |
| Dominant and secondary parameter or Z, F, D, Q, VX, IX |
|
| Equivalent circuit diagram |
| Parallel or serial selectable |
|
| Average function |
| Function |
| Exponential averaging in continuous mode |
|
| Levels | | PM 6306: | 3 (and off) | | PM 6304: | 1 (and off) |
|
| Deviation mode (PM 6306 only) |
| Relative range in respect to reference value | |
| Measuring modes (Normal) |
| Continuous | |
| Single |
| Triggered via "TRIG" key |
| Triggered via handler interface |
| Triggered via IEEE-488 or RS-232 |
|
| Test frequency | | PM 6306: | 50, 60, 100, 120 Hz |
| 200 Hz to 100 kHz (100 Hz steps) |
| 100 kHz to 1 MHz (1 kHz steps) |
| DC (optional) | | PM 6304: | 50, 60, 100, 120 Hz |
| 200 Hz to 20 kHz (100 Hz steps) |
| 100 kHz |
| DC (optional) |
|
| Read-out |
| Display or via IEEE-488 or RS-232 interface |
|
| Measuring Modes (Fast) |
| Max. speed | |
| Test frequency | | PM 6306: | 200 Hz to 100 kHz (200 Hz steps) |
| 100 kHz to 1 MHz (1 kHz steps) |
| DC (optional) | | PM 6304: | 200 Hz to 20 kHz (200 Hz steps) 100 kHz |
| DC (optional) |
|
| Single |
| Triggered via handler interface |
| Triggered via IEEE-488 or RS-232 |
|
| Read-out |
| Via IEEE or RS-232 interface (display blanked) |
|
| Binning |
| Standard bins | |
| Special bins | |
| Bin programming via |
| IEEE-488 interface |
| RS-232 interface |
| Bin programmer (PM 6304 only) |
|
| Bin limit programming | |
| Trim function |
| Open circuit |
| Open circuit compensation Z > 100 kW |
|
| Short circuit |
| Short circuit compensation Z < 10W |
|
| Protection against charged capacitors |
| C < 2 mF | | PM 6306: | Vmax < 200V | | PM 6304: | Vmax < 500V |
|
| 2 mF o C o 2 mF | | PM 6306: | Vmax <47 x (C/mF) -0.234 |
| (Vmax in V, C in mF) | | PM 6304: | Vmax <117 x (C/mF) -0.234 |
| (Vmax in V, C in mF) |
|
| Stored settings (non-volatile memory) |
| Front panel settings |
| 9 + 1 (trim figures included) |
|
| Bin settings | |
| Print measurements results |
| Print measurements results |
| Via RS-232 interface for serial printers |
|
| Calibration interval |
| Calibration interval | |
| Environmental Conditions |
| Operating Temperature | |
| Storage Temperature | |
