- 100 MHz and 200 MHz bandwidths
- Sample rates up to 2 GS/s real-time
- 2 or 4 fully isolated and floating channels, plus isolated external trigger
- 8 hours of continuous battery operation with two batteries installed, hot-swappable for virtually unlimited freedom from an AC power source
- Optional power application software offers the broadest range of power measurements at its price point
- Quickly document and analyze measurement results with OpenChoice¢ç software or integrated CompactFlash¢ç mass storage
- FFT standard on all models
- Advanced triggers to quickly capture the event of interest
- Easily operate the oscilloscope with traditional, analog-style knobs and multi-language user interface
- Simplify setup and operation with autoset menu, autorange, waveform and setup memories, and built-in, context-sensitive help
- Adjust the oscilloscope to your operating environment with backlit menu buttons/display and brightness/contrast controls
- 11 automatic measurements

- Industrial power design, troubleshooting, installation, and maintenance
- Advanced electronics design, troubleshooting, installation, and maintenance
- Automotive design and test
- Education



TPS2000 Series Oscilloscopes Deliver Powerful Productivity from Bench to Field

As an engineer or technician, you must often make floating, or differential, measurements. You face faster edges and clocks due to the migration of higher performance technologies to widely implemented electronic systems and subsystems, with the pressure to conform to customer specifications or industry requirements.

And you may need to develop and test designs in a variety of challenging environments that demand versatility.

You can quickly tackle these tough challenges to speed the design, troubleshooting, installation, and maintenance of components and systems with the world's first 4-isolated-channel, full featured, battery-powered oscilloscope ? the TPS2000 Series.

+ Make Floating and Differential Measurements - Quickly, Accurately, Affordably

Make floating and differential measurements much more quickly and accurately, and speed verification of power supply performance, complex control circuits and the effects of neutral current for differential voltages, up to 30 VRMS floating on four channels simultaneously, when the TPS2000 Series is paired with its standard P2220 passive probe.

Easily perform these measurements up to 600 VRMS CAT II (or 300 VRMS CAT III) floating when the oscilloscope is coupled with its optional P5120 passive, high-voltage probe.

Accurately characterize rise and fall times and other waveform parameters in circuits with different low levels or ground references, while removing ground loop interference, with just 37 pf capacitance to chassis on each of four isolated channels.

Innovative IsolatedChannel¢â technology makes these measurements possible - all designed with your safety in mind.

Four IsolatedChannel¢â inputs and isolated external trigger input for quick, accurate, affordable floating and differential measurements.

+ Speed the Design and Test of Industrial Power Systems and Subsystems

The TPS2000 Series easily addresses the unique challenges that plague industrial power designers and technicians. You regularly confront high voltages and currents, and must often make potentially hazardous floating measurements. With the TPS2000 Series' power bundle (TPS2PBND), which includes the P5120 passive, high-voltage probes and TPS2PWR1 power measurement and analysis software, you can use a single instrument to make a broad range of measurements.

Easily evaluate these high voltages and currents, or debug power electronics control circuits, with differential voltages up to 600 VRMS CAT II (or 300 VRMS CAT III) floating. Accurately measure three-phase power and circuits with different low levels or ground references.

Quickly perform a broad range of power-specific measurements, such as switching loss, harmonic distortion measurements to the 50th harmonic, and dv/dt and di/dt cursor measurements.

Perform three-phase power measurements of variable frequency drives.

Conduct harmonic distortion measurements with TPS2PWR1 software.

+ Quickly Debug and Characterize Signals with DRT Sampling Technology

Characterize a wide range of signal types on four channels simultaneously with the TPS2000 Series’ unique digital real-time (DRT) sampling technology. This acquisition technology makes it possible to capture high-frequency information, such as glitches and edge anomalies, that eludes other oscilloscopes in its class, so that you can be sure to get a complete view of your signal to speed debug and characterization.

Capture elusive glitches - the first time - with digital real-time (DRT) sampling technology.

+ Easily Analyze and Document Your Measurement Results

Quickly reveal signal interference, cross-talk and the effects of vibration with frequency domain analysis using the TPS2000 Series' standard Fast Fourier Transform (FFT) feature. Easily analyze and document your measurement results with integrated CompactFlash® mass storage or OpenChoice® software.

+ Correlate Your Measurements from Bench to Lab to Field*1

Use the TPS2000 Series on your bench, in the lab, or in the field, with the industry’s longest continuous battery life – 8 hours and beyond – in a highly mobile package. Harness the power of virtually unlimited freedom from an AC power source with hot-swappable batteries. Easily correlate measurements between bench, lab, and field with its portability.

Easily correlate your measurements between bench, lab, and field with the TPS2000 Series' portability.

*1 Please refer to Environmental and Safety specifications.

+ Optimize Your Productivity with Versatility

Intuitively operate the oscilloscope with familiar, analog-style knobs per channel. Reduce your measurement time with features like autoset, autorange, automatic measurements, 10X to 1000X vertical position control, probe check wizard, and context-sensitive help. Effectively work in a variety of challenging environments – from bright daylight to dimly lit areas – using backlit menu buttons and brightness/contrast controls.

Harness the power of virtually unlimited freedom from an AC power source with hot-swappable batteries.

Easily use the oscilloscope even in environments that challenge operation, with features such as analog-style knobs per channel, backlit menu buttons, and brightness/contrast controls.

Speed documentation and analysis of measurements results with OpenChoice® software and integrated CompactFlash® mass storage.

Characteristics/Specs

+ TPS2000 Series Electrical Characteristics Feature TPS2012 TPS2014 TPS2024 Isolated Channels 2 4 4 Bandwidth*1 (MHz) 100 100 200 Sample Rate (GS/s) per channel 1.0 1.0 2.0 Record Length Record Length Display (1/4 VGA LCD) Color Battery Operation Capacity for two hot-swappable battery packs. One standard battery pack offers 4 hours of battery operation. Optional second battery pack extends battery operation to 8 hours. Continuous battery operation is possible by hot-swapping charged batteries. Automatic Measurements 11 Isolated External Trigger Input (Impedance Isolated) Yes Vertical Resolution 8-bits (normal or with averaging) Vertical Sensitivity 2 mV to 5 V/div on all models with calibrated fine adjustment DC Vertical Accuracy ±3% Vertical Zoom Vertically expand or compress a live or stopped waveform Max Input Voltage (1 ㏁)*2 300 VRMS CAT II at BNC signal to BNC shell, 1000 VRMS CAT II at probe tip to earth ground with optional P5120 passive, high-voltage probe Float Voltage*2 600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth Position Range 2 mV to 200 mV/div ±2 V; >200 mV to 5 V/div ±50 V Bandwidth Limit 20 MHz Linear Dynamic Range ±5 div Time Base Range 5 ns to 50 s/div 5 ns to 50 s/div 2.5 ns to 50 s/div Time Base Accuracy 50 ppm Input Impedance 1 MO ±2 % in parallel with 20 pF Input Coupling AC, DC, GND Horizontal Zoom Horizontally expand or compress a live or stopped waveform FFT Standard RS-232, Centronics-Parallel Ports Standard PC Connectivity Standard Integrated CompactFlash® Mass Storage Standard Power Measurements Optional package that offers instantaneous power waveform analysis, waveform analysis, harmonics analysis, switching loss, phase angles, dv/dt and di/dt cursors *1 Bandwidth is 20 MHz at 2 mV/div, all models. Bandwidth is 200 MHz typical at 5 mV/div, 200 MHz models only. Bandwidth is 200 MHz typical between 40 °C and 50 °C, 200 MHz models only. *2 Please refer to Environmental and Safety specifications. + Acquisition Modes Peak Detect - High frequency and random glitch capture. Captures glitches as narrow as 12 ns typical using acquisition hardware at all time/div settings from 5 µs/div to 50 s/div. Sample - Sample data only. Average - Waveform averaged, selectable: 4, 16, 64, 128. Single Sequence - Use the Single Sequence button to capture a single triggered acquisition sequence at a time. Scan/Roll Mode - At acquisition time base settings of =100ms/div . + Trigger System (Main Only) Trigger Modes - Auto, Normal, Single Sequence + Trigger Types Edge (rising or falling) - Conventional level-driven trigger. Positive or negative slope on any input. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject. Video - Trigger on all lines or individual line, odd/even or all fields from composite video, or broadcast standards (NTSC, PAL, SECAM). Pulse Width (or Glitch) - Trigger on a pulse width less than, greater than, equal to, or not equal to a selectable time limit ranging from 33 ns to 10 sec. + Trigger Source 2-channel model - CH1, CH2, Ext, Ext/5, Ext/10. 4-channel models - CH1, CH2, CH3, CH4, Ext, Ext/5, Ext/10. + Trigger View Displays trigger signal while trigger view button is depressed. + Trigger Signal Frequency Readout Provides a frequency readout of the trigger source with 6-digit resolution. + Cursors Types - Voltage, Time. Measurements - ?T, 1/?T (frequency), ?V, dv/dt*3, di/dt*3. *3 Requires TPS2PWR1 power application package + Measurement System Automatic Waveform Measurements - Period, Frequency, +Width, –Width, Rise time, Fall time, Max, Min, Peak-to-Peak, Mean, Cycle RMS. + Waveform Processing Operators - Add, Subtract, Multiply, FFT. FFT - Windows: Hanning, Flat Top, Rectangular; 2048 sample points. Sources - 2-channel models: CH1 - CH2, CH2 - CH1, CH1 + CH2, CH1 × CH2. 4-channel models: CH1 - CH2, CH2 - CH1, CH3 - CH4, CH4 - CH3, CH1 + CH2, CH3 + CH4, CH1 × CH2, CH3 × CH4. Autoset Menu - Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset. Autorange - Allows the user to change test points without resetting the oscilloscope. + Autoset Menu for Multiple Signal Types Signal Type Autoset Menu Choices Square wave Single-cycle, Multi-cycle, Rising or Falling Edge Sine Wave Single-cycle, Multi-cycle, FFT Spectrum Video (NTSC, PAL, SECAM) Video (NTSC, PAL, SECAM) Field: All, Odd, or Even Line: All or Selectable Line Number + Nonvolatile Storage Nonvolatile Storage Standard (with CompactFlash® Mass Storage) Reference Waveform Display Two 2500 point reference waveforms Waveform Storage 96 or more reference waveforms per 8 MB Setups 4000 or more front panel setups per 8 MB Screen Images 128 or more screen images per 8 MB (the number of images depends on file format selected) Save All 12 or more Save All operations per 8 MB. A single Save All operation creates 2 to 9 files (setup, image, plus one file for each displayed waveform). + Display Characteristics Display - 1/4 VGA, passive color LCD with color on black background with adjustable multi-level contrast and brightness controls. Interpolation - Sin(x)/x. Display Types - Dots, vectors. Persistence - Off, 1 sec, 2 sec, 5 sec, infinite. Format - YT and XY. + I/O Interface Printer Port (standard) - Centronics-type Parallel. Graphics File Formats – TIFF, PCX (PC Paint Brush), BMP (Microsoft Windows), EPS (Encapsulated Postscript) and RLE. Printer Formats – Bubble Jet, DPU-411, DPU-412, DPU-3445, Thinkjet, Deskjet, Laser Jet, Epson Dot (9- or 24-pin), Epson C60, Epson C80. Layout – Landscape and Portrait. RS-232 Port (standard) - 9-pin DTE. RS-232 Programmability - Full talk/listen modes. Control of all modes, settings and measurements. Baud rate up to 19,200. Mass Storage CompactFlash® Memory - • Accepts any Type 1 CompactFlash® card, up to and including 1 GB (card not included). Built-in Clock