PM 6304 RCL미터
모델 : PM 6304
* 고정밀 0.1% 와 교류검출 50Hz ~ 100KHz이고, 측정 레인지 전환은 자동레인지 측정 전환기능과 매뉴얼기능이 있으며, Contact check로 접촉정도 pass/Fail을 확인하여 정확한 test 할수 있는 기능과 구성요소를 9개의 parameter test 측정가능한 만능 오토메틱 RCL Meters 장비 입니다.
리모트된 프로그램인 3가지 테스트 전압레벨 과 204개의 테스트주파수를 가지고 있습니다.
그리고, 부품테스트나 소자테스트에 제품의 양품및 불량테스트 확인 측정으로 가장 많이 쓰이는 장비입니다.
간단하고 , 사용하기가 편리합니다.
* 부품 Test ( SMD ,MLCC, .저항, 콘덴서 , 코일 ) 등을 측정.
* 제품의 양품및 불량 Test 확인 측정
| AC Test Mode |
| Test frequency | | PM 6306: | 50, 60, 100, 120 Hz |
| 200 Hz to 100 kHz (100 Hz steps) |
| 100 kHz to 1 MHz (1 kHz steps) | | PM 6304: | 50, 60, 100, 120 Hz |
| 200 Hz to 20 kHz (100 Hz steps) |
| 100 kHz |
|
| Test frequency accuracy | | PM 6306: | 0.01% | | PM 6304: | 0.01% |
|
| Test signal levels | | PM 6306: | 50 mV to 2V (10 mV steps) via 100Ω | | PM 6304: | 50 mV via 100Ω |
| 1V via 100Ω |
| 2V via 400Ω |
|
| Basic measurement accuracy at normal measurement mode | | PM 6306: | 0.1% ± 1 digit (for ³ 0.25V, £ 50 kHz) |
| 0.1% * (f/50 kHz) ± 1 digit (for ³ 0.25V, > 50 kHz) |
| 0.1% * (0.25V/Vt) ± 1 digit (for < 0.25V, £ 50 kHz) | | PM 6304: | 0.05% ± 1 digit (for PM 6304C, £ 2 kHz) |
| 0.1% ± 1 digit (for £ 20 kHz) |
| 0.4% ± 1 digit (100 kHz) |
| 0.5% ± 1 digit (for 50 mV £ 20 kHz) |
| 2.0% ± 1 digit (for 50 mV, 100 kHz) |
|
| DC bias |
| Internal | | PM 6306: | 0 to 10V (0.1V steps) | | PM 6304: | 2V |
|
| External | | PM 6306: | 0 to 40V | | PM 6304: | 0 to 40V |
|
| DC test mode (Optional) |
| Test signal levels | | PM 6306: | 50 mV to 2V (10 mV steps) via 100Ω | | PM 6304: | 300 mV via 100Ω |
| 1V via 100Ω |
| 2V via 400Ω |
|
| Basic measurement accuracy | | PM 6306: | 0.1% ± 1 digit (for ³ 0.25V) | | PM 6304: | 0.1% ± 1 digit (for 1V) |
|
| Contact check (PM 6306 only) |
| Pass | |
| Fail |
| 3Ω (with indication of failed connection lead) |
|
| Maximum measuring ranges |
| Impedance/Resistance AC Z or RAC | |
| Resistance DC R DC | |
| Capacitance C | |
| Inductance L | |
| Quality factor Q | |
| Dissipation factor D | |
| Phase Angle F | |
| Voltage monitor VX | |
| Current monitor IX | |
| Maximum resolution |
| Impedance/Resistance AC Z or RAC | |
| Resistance DC R DC | |
| Capacitance C | |
| Inductance L | |
| Quality factor Q | |
| Dissipation factor D | |
| Phase Angle F | |
| Voltage monitor VX | |
| Current monitor IX | |
| Circuit diagram |
| Display |
| 1 of 7 different equivalent circuit diagrams |
|
| Auto Mode |
| Read-out |
| Dominant and secondary parameter |
|
| Equivalent circuit diagram |
| Parallel for R+C, Serial for R+L |
|
| Manual mode |
| Read-out |
| Dominant and secondary parameter or Z, F, D, Q, VX, IX |
|
| Equivalent circuit diagram |
| Parallel or serial selectable |
|
| Average function |
| Function |
| Exponential averaging in continuous mode |
|
| Levels | | PM 6306: | 3 (and off) | | PM 6304: | 1 (and off) |
|
| Deviation mode (PM 6306 only) |
| Relative range in respect to reference value | |
| Measuring modes (Normal) |
| Continuous | |
| Single |
| Triggered via "TRIG" key |
| Triggered via handler interface |
| Triggered via IEEE-488 or RS-232 |
|
| Test frequency | | PM 6306: | 50, 60, 100, 120 Hz |
| 200 Hz to 100 kHz (100 Hz steps) |
| 100 kHz to 1 MHz (1 kHz steps) |
| DC (optional) | | PM 6304: | 50, 60, 100, 120 Hz |
| 200 Hz to 20 kHz (100 Hz steps) |
| 100 kHz |
| DC (optional) |
|
| Read-out |
| Display or via IEEE-488 or RS-232 interface |
|
| Measuring Modes (Fast) |
| Max. speed | |
| Test frequency | | PM 6306: | 200 Hz to 100 kHz (200 Hz steps) |
| 100 kHz to 1 MHz (1 kHz steps) |
| DC (optional) | | PM 6304: | 200 Hz to 20 kHz (200 Hz steps) 100 kHz |
| DC (optional) |
|
| Single |
| Triggered via handler interface |
| Triggered via IEEE-488 or RS-232 |
|
| Read-out |
| Via IEEE or RS-232 interface (display blanked) |
|
| Binning |
| Standard bins | |
| Special bins | |
| Bin programming via |
| IEEE-488 interface |
| RS-232 interface |
| Bin programmer (PM 6304 only) |
|
| Bin limit programming | |
| Trim function |
| Open circuit |
| Open circuit compensation Z > 100 kW |
|
| Short circuit |
| Short circuit compensation Z < 10W |
|
| Protection against charged capacitors |
| C < 2 mF | | PM 6306: | Vmax < 200V | | PM 6304: | Vmax < 500V |
|
| 2 mF o C o 2 mF | | PM 6306: | Vmax <47 x (C/mF) -0.234 |
| (Vmax in V, C in mF) | | PM 6304: | Vmax <117 x (C/mF) -0.234 |
| (Vmax in V, C in mF) |
|
| Stored settings (non-volatile memory) |
| Front panel settings |
| 9 + 1 (trim figures included) |
|
| Bin settings | |
| Print measurements results |
| Print measurements results |
| Via RS-232 interface for serial printers |
|
| Calibration interval |
| Calibration interval | |
| Environmental Conditions |
| Operating Temperature | |
| Storage Temperature | |
