6700 시리즈는 500VA 부터 4KVA의 모델을 가지며 Linear Type에서 1KVA 기준에 2U 사이즈는 용량 대비 작은 사이즈의 장점을 가지고 자체프로그램 기능도 가지고 있습니다.
특징
1. 240 ⅹ 64 그래픽 LCD Display (V, Arms, F, A peak, P, PF and Times)
2. 프로그래밍 디자인으로 Start 및 Ending Angle/Surge/Drop cycle
3. 50개의 메모리 당 8개의 스텝 내장
4. Optional High resolution Power meter 내장 가능
5. Linear Type 디자인
6. 높은 Crest Factor 4:1
7. 500VA ~ 4KVA 용량 제품 군
8. Over Current Fold Back 모드
9. 과부하, Short, 온도 보호기능
6700 Series Linear Programmable AC Power Source
Model | 6705 | 6710 | 6720 | 6730 | 6740 | ||
---|---|---|---|---|---|---|---|
INPUT | |||||||
Phase | 1 Phase | ||||||
Voltage | 115/230Vac ± 15% | 230Vac ± 15% | |||||
Frequency | 47-63Hz | ||||||
OUTPUT | |||||||
Power rating | 500VA | 1000VA | 2000VA | 3000VA | 4000VA | ||
Max. Current(r.m.s) | 0-150V | 4.2A | 8.4A | 16.8A | 25.2A | 33.6A | |
0-300V | 2.1A | 4.2A | 8.4A | 12.6A | 16.8A | ||
Max. Current(peak) | 0-150V | 16.8A | 33.6A | 67.2A | 100.8A | 134.4A | |
0-300V | 8.4A | 16.8A | 33.6A | 50.4A | 67.2A | ||
Option 0-600V | |||||||
Max. Current(r.m.s) | 0-300V | 2.1A | 4.2A | 8.4A | 12.6A | 16.8A | |
0-600V | 1.05A | 2.1A | 4.2A | 6.3A | 8.4A | ||
Max. Current(peak) | 0-300V | 8.4A | 16.8A | 33.6A | 50.4A | 67.2A | |
0-600V | 4.2A | 8.4A | 16.8A | 25.2A | 33.6A | ||
Phase | 1Phase / 2W | ||||||
THD(Total Harmonic Distortation) | <=0.5% at 45-500Hz (Resistive Load) | ||||||
Crest Factor | >= 4 | ||||||
Line Regulation | 0.1% max for a ± 10% line change. | ||||||
Load Regulation | <=0.5% (Resistive Load) | ||||||
Response Time | < 100μS | ||||||
SETTING | |||||||
Voltage | Range | 0-300V, 150/300V Auto or 0-600V,300/600V Auto(Option 0-600V) | |||||
Resolution | 0.1V | ||||||
Accuracy | ±(0.5%+2 counts) | ||||||
Frequency | Range | 45-500Hz | |||||
Resolution | 0.1Hz at 45-99.9Hz , 1Hz at 100-500Hz | ||||||
Accuracy | ±0.02% of setting | ||||||
Frequency (Option 45Hz-1KHz) | Range | 45-1000Hz | |||||
Resolution | 0.1Hz at 45-99.9Hz , 1Hz at 100-1000Hz | ||||||
Accuracy | ±0.02% of setting | ||||||
Starting& Ending Phase Angle | Range | 0-360° | |||||
Resolution | 1° | ||||||
Accuracy | ±1°(45 - 65HZ) | ||||||
MEASUREMENT | |||||||
Frequency | Range | 45.0Hz - 500.0Hz 501.0Hz - 1000.0Hz (Opt.625) | |||||
Resolution | 0.1Hz | ||||||
Accuracy | ±0.1Hz at 45.0 - 500.0Hz ±0.5Hz at 501.0 - 1000.0Hz | ||||||
Voltage | Range | 0.0-300.0V / 0.0-600.0V | |||||
Resolution | 0.1V | ||||||
Accuracy | ± (0.5% of reading +2 counts) for 0-300V ± (0.5% of reading +4 counts) for 0-600V | ||||||
Current(r.m.s) | Range | L | 0.000-3.500A | ||||
H | 3.00-35.00A | ||||||
Resolution | L | 0.001A | |||||
H | 0.01A | ||||||
Accuracy | L | ± (0.5% of reading +5 counts) for 0-300V ± (0.5% of reading +10 counts) for 0-600V | |||||
H | ± (0.5% of reading +3 counts) | ||||||
Current(peak) | Range | 0.0 -200.0A | |||||
Resolution | 0.1A | ||||||
Accuracy | ± (1% of reading +2 counts) | ||||||
Power | Range | L | 0.0-350.0W | ||||
H | 300-4000W | ||||||
Resolution | L | 0.1W | |||||
H | 1W | ||||||
Accuracy | L | ± (0.6% of reading +5 counts) | |||||
H | ± (0.6% of reading +2 counts) | ||||||
Power Factor | Range | 0 - 1.000 | |||||
Resolution | W / VA ,Calculated and displayed to three significant digits | ||||||
Accuracy | |||||||
GENERAL | |||||||
Low Range Meter (for 6705/ 6710 Option) | Range : 2.0mA - 350.0mA / 0.20 - 35.00W Resolution : 0.1mA / 0.01W Accuracy : ± (0.6% of reading +5 counts). | ||||||
Remote Input Signal(Option) | Test, Reset, Recall program memory 1 through 7 | ||||||
Remote Output Signal | Pass, Fail , Test-in Process | ||||||
Memory | 50 memories, 9 steps/memory | ||||||
Sync Output Signal | Output Signal 10V ,BNC type | ||||||
Timer | 0=Continuous, 0.1-999.9 (Unit: sec, minute, hour selectable) | ||||||
Alarm Volume Setting | Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume. | ||||||
Graphic Display | 240 x 64 dot resolution Monographic LCD /Contrast 9 Levels 1-9 | ||||||
Auto loop cycle | By step or memory, or system loop cycle setting. 0=Continuous, OFF, 2~9999 | ||||||
Over Current Fold Back | On/Off , Setting On when output current over setting A-Hi value it will fold back output voltage to keep constant output current is setting A-Hi value. | ||||||
Protection | OCP, OTP ,OVP and Alarm | ||||||
Interface | GPIB / RS232 / Remote I/P Control option | ||||||
Dimension(WxHxD) mm | 430 x 89 x 400, 2U | 430 x 89 x 560, 2U | 430 x 267 x 650, 6U | 430 x 667 x 650, 15U | 430 x 667 x 650, 15U | ||
Net Weight | 25Kg | 36Kg | 90Kg | 165Kg | 192Kg | ||
Operation Environment | 0-40°C/20-80%RH |
상품문의가 없습니다.
등록된 상품이 없습니다.
Copyright ⓒ 2015 삼성종합계측기. All Rights Reserved.